LSVPN deployment using iBGP

Showing results for 
Show  only  | Search instead for 
Did you mean: 

LSVPN deployment using iBGP

L0 Member

I'm looking for information to see any one setup LSVPN using iBGP or other dynamic protocol such as OSPF. Here the scenario and not sure LSVPN using iBGP is right choice or not.


IPSec VPN tunnles between HQ and DR

Layer 2 extension between HQ and DR so that same server VLAN can leave at both location

IPSec VPN tunnels from 15 remote statelite offices to HQ and DR

No VPN tunnels between 15 remote statliet offices


Limitation on IPSec VPN tunnles is static routes, if 2 servers in same vlan or entire server vlan turn up at DR all static routes needs to update manually. I want to see if we can use any dynamic routing protocol to aviod updating static routes.


Is anyone have setup VPN tunnels using PAN FWs and if it is, it tested and working the way scenario I have discribe above?


Thank you

  • 0 replies
Like what you see?

Show your appreciation!

Click Like if a post is helpful to you or if you just want to show your support.

Click Accept as Solution to acknowledge that the answer to your question has been provided.

The button appears next to the replies on topics you’ve started. The member who gave the solution and all future visitors to this topic will appreciate it!

These simple actions take just seconds of your time, but go a long way in showing appreciation for community members and the LIVEcommunity as a whole!

The LIVEcommunity thanks you for your participation!