OSPF Route Filtering / Suppression

cancel
Showing results for 
Search instead for 
Did you mean: 

OSPF Route Filtering / Suppression

L0 Member

Hey guys, I have a couple questions about OSPF on the PAN. I am running code 6.0.9 and have a recent request to bring up a new OSPF area for a special project. Right now we have OSPF area 0.0.0.0 and everything works great, we haven't had the need for any additional areas until now.

I would like to bring up area 0.0.0.1 and only advertise a couple routes from area 0.0.0.0, for example 10.100.0.0/16, likewise I would also like to only allow a couple inbound routes from area 0.0.0.1 into area 0.0.0.0. Looking at the documentation I see how to suppress routes from area 0.0.0.1 but not the other way around. Is this supported? I'm a bit confused and would like some insight into this.


Thanks,

0 REPLIES 0
Like what you see?

Show your appreciation!

Click Like if a post is helpful to you or if you just want to show your support.

Click Accept as Solution to acknowledge that the answer to your question has been provided.

The button appears next to the replies on topics you’ve started. The member who gave the solution and all future visitors to this topic will appreciate it!

These simple actions take just seconds of your time, but go a long way in showing appreciation for community members and the LIVEcommunity as a whole!

The LIVEcommunity thanks you for your participation!