Why would what worked in Sophos would not work with PA

Hello everyone,

Trying to make my ubiquity unifi access points with multiple ssid tagged with their  own vlan IDs work with PA. it worked seamlessly with Sophos but can't make it work with PA. 

I have one Ethernet port L3 configured with subnet D

NAT LOGGING

Hello,

  I am a newbie so please bear with me, I Have a very simple LAB with a Palo Alto firewall with 11.00 Ver and an internet connection.I know that to provide internet connection to the user i would need a Policy,default route and a source NAT.

Receiving too many alerts when a ISP or Tunnel link goes up or down.

Hello.

I have a Palo Alto PA-440

We have enabled path monitoring for our ISPs, with the destination address/monitor IP set to 8.8.8.8. The ping interval is set to 3 seconds, and the ping count is 5.

Additionally, we have configured and enabled system

PA- Security Policy Destination as FQDN issue

Dear Community,

I am facing an issue were the i have post security rule allowing the access to some FortiGuard URLs, on the other hand i am have a default deny rule with reset-both action right above to the interzone & intrazone policies. What actu

Unable to access HTTP & HTTPS

When I switch from passive to active, I can't access the application via http and https. But I can ping and telnet the application via port 443

Split Tunnel - Exclude Client Application

Hello,

I am setting up a new Global Protect gateway.

We previously havent setup Global Protect (GP) before with Split tunnel so this is my first time and its not going smoothly..

i am trying to exclude client applications for some software we use. bei

videoparse.jar detected as Grayware

"videoparse.jar" is detected as Grayware in Wildfire but not found now.

why this was flagged malicious ? 

File hash : 844ccde43fa61803f1643401600e17dced86c60509ee340ae83b332a068f8dcc

VirusTotal - File - 844ccde43fa61803f1643401600e17dced86c60509ee340

[Error]: Failed to create exclude route in Global protect

Hello All,

what could be the issue when user is not able to connect Global protect and we can see [Error]: "Failed to create exclude route" in  pan_gp_event_log.

Unable to set SSL/TLS Service Profile with Panorama

latency Troubleshooting

We have a load increase following the unblocking of an application's url. How can I troubleshoot for finding what's causing this?

User ID Anomalies

Hi,

I had a strange behaviour with some user on user ID. We have 2 site A and B and our firewall have the mapping from the same agent.

we found that user1 access site A and user2 access site B.

issue that we found that user1 is access site B usin

HA Pair - peer version too old

I have two hardware gateways in a HA pair running 9.1.19.  Ive upgraded one to 10.0 and then to 10.1.14.  It now complains that the HA 'peer version is too old' and it has suspended HA.  If i suspend HA on the remaining 9.1 gateway, HA doesnt activat

Build in tool to test throughput

Hello experts,

Im wondering if Palo Alto firewalls have a build in tool to test throughput on specific interface. We are trying to use iperf on an endpoint and test channel utilization from the firewall or if possible, firewall acting as iperf serv