IPTV Multicast stream setup problem

Showing results for 
Show  only  | Search instead for 
Did you mean: 

IPTV Multicast stream setup problem

L2 Linker

My internet provider also sends the tv signal using multicast. If i set it up according to the guide which is congruently with other sources and the way this should be properly set up: internal interface IGMP, external PIM enabled I receive the following error message:


Failed to get IP address for interface ethernet1/1. (Module: routed)


Has any of you ever gotten this to work?


I have the assumption, that since this PAN is on PPPOE there is a problem with the IP assignment.

  • 0 replies
  • 101 Subscriptions
Like what you see?

Show your appreciation!

Click Like if a post is helpful to you or if you just want to show your support.

Click Accept as Solution to acknowledge that the answer to your question has been provided.

The button appears next to the replies on topics you’ve started. The member who gave the solution and all future visitors to this topic will appreciate it!

These simple actions take just seconds of your time, but go a long way in showing appreciation for community members and the LIVEcommunity as a whole!

The LIVEcommunity thanks you for your participation!