IPV6 TO IPV4 Conversion Through NAT64 Not Working

cancel
Showing results for 
Show  only  | Search instead for 
Did you mean: 
Announcements
Please sign in to see details of an important advisory in our Customer Advisories area.

IPV6 TO IPV4 Conversion Through NAT64 Not Working

L0 Member

We have servers in our trusted zone with which are DNAT to the public IPv4. Now we want to use the public ipv6 as our firewall. As in the current scenario, we are using the conversion of IPV6 to IPV4 with the help of a router. We had configured the NAT64 on the firewall and it is doing the conversion properly but we are not able to access the server. When we use the local IP of the server within the IPV6 prefix it just working. But when we use the Interface Public IPv4 with prefix it is not working. As the Interface IP is DNAT to the server and Global DNS has an entry of that Public IPV6 prefix with Public IPV4. Anyone having any suggestions for a solution. 

0 REPLIES 0
  • 1284 Views
  • 0 replies
  • 0 Likes
Like what you see?

Show your appreciation!

Click Like if a post is helpful to you or if you just want to show your support.

Click Accept as Solution to acknowledge that the answer to your question has been provided.

The button appears next to the replies on topics you’ve started. The member who gave the solution and all future visitors to this topic will appreciate it!

These simple actions take just seconds of your time, but go a long way in showing appreciation for community members and the LIVEcommunity as a whole!

The LIVEcommunity thanks you for your participation!