07-03-2021 01:35 AM
Hi All
I've been battling for the past couple of weeks to get a SIP based telephone system to work through my client's PA-220.
I have the NAT and Security Policies set up correctly to allow the SIP traffic to flow on port 5060. However, the RTP traffic is only allowing outgoing voice. The ports being requested by the VoIP provider for RTP 7000-7031, 7100-7131 and 7300-7331.
SIP-ALG is disabled. When I enable it, there is no voice in either direction.
Has anyone had this issue? Some pointers in the right direction would be amazing.
Thanks in advance
Aled
Click Accept as Solution to acknowledge that the answer to your question has been provided.
The button appears next to the replies on topics you’ve started. The member who gave the solution and all future visitors to this topic will appreciate it!
These simple actions take just seconds of your time, but go a long way in showing appreciation for community members and the LIVEcommunity as a whole!
The LIVEcommunity thanks you for your participation!
