Need 2 subinterface to use the same ip address (failover setup from connected devices)

cancel
Showing results for 
Show  only  | Search instead for 
Did you mean: 
Announcements
Please sign in to see details of an important advisory in our Customer Advisories area.

Need 2 subinterface to use the same ip address (failover setup from connected devices)

L0 Member

We have two 5250s setup active/passive. we have two vmware VeloCloud devices connected that have similar active/passive failover. VeloCloud 1 has interfaces mirrored by VeloCloud2...including the interface ip addressing. Palo does not like two interfaces with the same ip address. What can y'all recommend for us to have the same ip address on two difference interfaces on the 5250 to support the VeloCloud failover setup?

 

VeloCloud1 ip x.x.234.1port3 active ==> switch1 vlan 505 ==> 5250 subinterface 13.505 ip needs to be x.x.234.2

VeloCloud2 ip x.x.234.1port3 passive ==> switch2 vlan 505 ==> 5250 subinterface 15.505 ip needs to be x.x.234.2

 

What can we do at the 5250 so 13.505 and 15.505 can be configured with ip x.x.234.2?

 

0 REPLIES 0
  • 1084 Views
  • 0 replies
  • 0 Likes
Like what you see?

Show your appreciation!

Click Like if a post is helpful to you or if you just want to show your support.

Click Accept as Solution to acknowledge that the answer to your question has been provided.

The button appears next to the replies on topics you’ve started. The member who gave the solution and all future visitors to this topic will appreciate it!

These simple actions take just seconds of your time, but go a long way in showing appreciation for community members and the LIVEcommunity as a whole!

The LIVEcommunity thanks you for your participation!