General Topics

Upgrade PAN-OS 7.0.9 to 7.1.6

Hi, We are planning to upgrade the PAN-OS software from 7.0.9 to 7.1.6. I read on some articles that the base image does not need to be installed. I have two options as follows: Option 1: 7.1.0 (Download, NO install).7.1.6 (Download and install).Option 2: 7.1.0 (Download and install).7.1.6 (Download and install). Which one is correct?

Aggregated port over Vsys (AE1 over...)

Hi, I'm thinking about put som vlans inside and Aggregate, and distribitute over various Vsys, as far I know, reading here in the community, it's possible use subAEinterfaces on different VSYS. Then, the question is, on wich VSYS must be the physical interface AE1? AE1.1, AE2.3 will be distributed over Vsys, and no need to put IP on AE1. Regards!

Flood protection

What is the best way to set up flood protection, separate profile one for ICMP, one for SYN cookies etc or put it all in one policie? What is the best way to determine what set your alarm rates, block rate etc? How successful is it, does good traffice get blocked very much

Ip missing in output

Hi, I have default profile. I added a node "RW_IPBL NODE" that has 11464 ips But after processing I only see 900. Generated I think by other nodes.What can be wrong? Thank you

MineMeld and dinamic list in Pa500

Hi, We have a Pa500. It read that only permit 10 list with a max 5000 ip's.it is right? I have deployed a MineMeld with default configuration. I have a list configured in Pa-500 https://ip-minemeld/feeds/inboundfeedhc. What does the pa-500 to be the largest list of 5000 ip? Do you only load the first 5000 ip's or do not load this list?Som...

License for SSL VPN (GP Client)

Hey guys, We have a PA 200 as lab firewall and I want to setup SSL vpn. Can you tell me which licenses I need for it? The GP window (Device -> GP Client) is completely empty. When I check for new versions, it says "The device does not have support". The same if I want to check for new PAN OS Software. I thougt it would be sufficient with the ...

group mapping lost suddenly

Seems like a bug any one faced in 7.0.9. We have several firewall and 2 time it happened group mapping lost suddenly and we have manaually refresh to get it it back.

Resolved! Processor Descriptions

I know I've seen an article/documentation on this somewhere, but I am struggling to find it. When running a show system environmentals, and more specifically the "Thermal" area for the processors, does anyone know what functions are being handled by which processor? We are running PA-5060 devices in our network. This would be helpful in our tra...

change webcertificate

Hi, Testing with Rome release I notice we need to have trusted CA on the Minemeld webserver. You can't use the Minemeld default certificate to import on the PA firewall. So I had to manually change certificate in the NGINX. Maybe this could be included in the webinterface of Minemeld that you can upload and change the certificate?

what if minemeld feed is not working

What happens if if whitelist some IP and then MineMeld is shutdown ? Will source or destination in the rule be replaced by 'any' ?

Policy Rules order

Hi there, if we are going to the tab "Policy" we will see 7 different sub tabs. The tabs are: SecurityNATQoSPBFApp OverrideCaptive PortalDoS Protection So I know for example that Security rules are always checked before NAT rules but whats about the rest? I spent planty of time google for this information but without success.

Resolved! SMTP Inbound Decryption

We have decyption turned on for inbound smtp trafffic. It is only decrpyting a portion of the encypted traffic. I have an open ticket with support but still working through it but I wanted to check to see if anyone else is experiencing issues. I do not believe it is something misconfigured on the firewall as it decrpyts as expected sometimes. T...

Palo alto networks Problem Session out

Hello , I have a problem with my firewall PA-200. When I try to open the GUI , I found an error message with a session out . You can find in the attachement this error message . I read that may be this problem can be related to the disk space. I do a show disk-space command and i found the the result in the attachement . Any one can help me to ...

Resolved! ARP table cache "incomplete"

Hello All, Need some clarification on ARP table. For some reason, once we swapped the devices from 2020>3020 our ARP table is seen as incomplete but services are working fine withing on that particular external subnet (before they did but we use gratuitous arp) . Also the time out of the "incomplete" entries pretty much a second ( ttl =1): ...

Concurrent users cannot connect

Hello, GlobalProtect GW with x-auth is enabled for IPsec VPN client services. However, only one concurrent session per user is allowed and any subsequent sessions disconnects the previous session user. Same issue happens whether the user is a local account or an AD account. We need to have multiple sessions running with the same user account. An...